AP-205H-MNT1 Wall Mount Kit
| Installation Guide
3
Figure 4
Securing AP-205H to Mount
8. Push the AP against the holes and then downward until the posts engage the slots at the top of the
mounting holes.
9. (Optional) Once the AP is fastened onto the wall mount, insert the T8H Torx security screw into the hole
located at the upper-right side of the mount and tighten.
10. (Optional) If not using PoE, connect the AC-DC power adapter to the DC power socket located on the
right side of the AP-205H (
AP-AC-48V36 sold separately
).
