AP-635-CVR-20
Installation Guide
0512234-01 |
July 2021
1
Package Contents
Plastic access point covers (20)
AP-635-CVR-20 Installation Guide
Introduction
The AP-635-CVR-20 cover clips onto the exterior of the access point, offering a practical and aesthetic
solution for concealment and customization.
Installing the AP-635-CVR-20
1. Align the holes on the cover with the LEDs on the access point (see
).
Figure 1
Aligning cover with LEDs
2. Press the cover onto the access point (see
, step 1), making sure the cover clips are
clipped into the first and fourth chassis slot near the Ethernet port (see
).