Arturia PolyBrute страница 111 Скачать руководство пользователя

Страница: 111 / 112

6. Assignment of Rights

You may assign all your rights to use the software to another

person subject to the conditions that (a) you assign to this other person (i) this Agreement

and (ii) the software or hardware provided with the software, packed or preinstalled

thereon, including all copies, upgrades, updates, backup copies and previous versions,

which granted a right to an update or upgrade on this software, (b) you do not retain

upgrades, updates, backup copies und previous versions of this software and (c) the

recipient accepts the terms and conditions of this Agreement as well as other regulations

pursuant to which you acquired a valid software license.

A return of the product due to a failure to accept the terms and conditions of this Agreement,

e.g. the product activation, shall not be possible following the assignment of rights.

7. Upgrades and Updates

You must have a valid license for the previous or more inferior

version of the software in order to be allowed to use an upgrade or update for the software.

Upon transferring this previous or more inferior version of the software to third parties the

right to use the upgrade or update of the software shall expire.

The acquisition of an upgrade or update does not in itself confer any right to use the

software.

The right of support for the previous or inferior version of the software expires upon the

installation of an upgrade or update.

8. Limited Warranty

Arturia warrants that the disks on which the software is furnished is

free from defects in materials and workmanship under normal use for a period of thirty (30)

days from the date of purchase. Your receipt shall be evidence of the date of purchase. Any

implied warranties on the software are limited to thirty (30) days from the date of purchase.

Some states do not allow limitations on duration of an implied warranty, so the above

limitation may not apply to you. All programs and accompanying materials are provided “as

is” without warranty of any kind. The complete risk as to the quality and performance of the

programs is with you. Should the program prove defective, you assume the entire cost of all

necessary servicing, repair or correction.

9. Remedies

Arturia's entire liability and your exclusive remedy shall be at Arturia's option

either (a) return of the purchase price or (b) replacement of the disk that does not meet the

Limited Warranty and which is returned to Arturia with a copy of your receipt. This limited

Warranty is void if failure of the software has resulted from accident, abuse, modification,

or misapplication. Any replacement software will be warranted for the remainder of the

original warranty period or thirty (30) days, whichever is longer.

10. No other Warranties

The above warranties are in lieu of all other warranties, expressed

or implied, including but not limited to, the implied warranties of merchantability and fitness

for a particular purpose. No oral or written information or advice given by Arturia, its dealers,

distributors, agents or employees shall create a warranty or in any way increase the scope

of this limited warranty.

11. No Liability for Consequential Damages

Neither Arturia nor anyone else involved in

the creation, production, or delivery of this product shall be liable for any direct, indirect,

consequential, or incidental damages arising out of the use of, or inability to use this product

(including without limitation, damages for loss of business profits, business interruption, loss

of business information and the like) even if Arturia was previously advised of the possibility

of such damages. Some states do not allow limitations on the length of an implied warranty

or the exclusion or limitation of incidental or consequential damages, so the above limitation

or exclusions may not apply to you. This warranty gives you specific legal rights, and you

may also have other rights which vary from state to state.

Arturia - User Manual PolyBrute - Software License Agreement

105

Содержание PolyBrute

















































































































Результаты поиска

Содержание PolyBrute

Отзывы:

Похожие инструкции для PolyBrute

Бренды по названию

Популярные бренды

Arturia PolyBrute, Руководство пользователя

Результаты поиска

Содержание PolyBrute

Отзывы:

Похожие инструкции для PolyBrute

Бренды по названию

Популярные бренды