Arturia Moog Modular V, Руководство пользователя

Страница: 50 / 155

50 ARTURIA – MOOG MODULAR V – USER’S MANUAL
•
The envelope control sliders
The two envelopes are directly linked to those of the VCAs: if you modify one of the parameters (At-
tack, Decay, Sustain or Release – the 2 slope parameters are not represented here for simplicity),
the modification will automatically and identically be taken to the synthesizer. The opposite is also
true!
• The 2D Pads
Now try to use one of the 2D controllers to modulate the cut-off frequency (to X) and the resonance
of filter1 (to Y).
►
For this, go back to the first screen to assign the 2 parameters to the 2D controller n°1 outputs.
The output connections can be found at the bottom of the synthesizer section (2D pad X /Y)
The connection of modulation inputs of filter1 to the 2D controller
►
Return to the second screen and manipulate the 2D controller handle vertically (X) or horizontally
(Y) to hear the result of the modulation.
using the 2D controller
To have access to these 2 modulation inputs on a low-pass resonant, it is essential to change the filter type! (the low-pass
24dB Moog does not possess a modulation input in the resonance!) Take the multimode filter and set it to low-pass mode, if
it isn’t already the case.