Art's-Way Manufacturing X900, Руководство оператора и иллюстрированный список запасных частей

Страница: 11 / 104

ART’S-WAY MANUFACTURING COMPANY, INC. Manual No. 690940
SAFETY INSTRUCTIONS 9
BEFORE OPERATING
SAFETY
INSTRUCTIONS
Do not wear loose fitting clothing as it may
catch in moving parts.
Make sure all guards and shields are
installed, including the tractor power take-
off (PTO) master shield, before starting or
operating the spreader.
OEM
Be sure that the correct implement driveline
parts are used and that they are properly
secured.
Lower the lifter wheels when the spreader is not
in use.
Install safety chain when attaching the spreader to the
tractor.
Clear the area of bystanders, especially
children, when making repairs, adjustments,
or performing maintenance on the spreader.
Do not allow riders.
Put all tractor and machine controls in “neutral”
and disengage the PTO before starting. Follow the
starting instructions according to the OEM tractor
manual.
Operate the spreader only while seated on
the tractor seat.
Make sure the unit is adequately supported
with safety blocks or safety stands when
changing tires or performing maintenance.
DURING OPERATION
CAUTION
STOP
Entanglement Hazard
Keep hands, feet, hair, and
clothing away from moving
parts. Wait for all movement to
stop before approaching equipment.
Before making adjustments:
1. Shut off the tractor,
2. Set parking brake,
3. Put machine in neutral, and
4. Remove key while making adjustments.
Keep all shields and guards in place and in
good working condition.
Keep all bystanders, especially children,
away from the spreader while in operation.
Do not allow riders while the spreader is in
operation.
Do not attempt to unclog, clean, or adjust
the spreader while it is running.
Stay away from overhead power lines.
Electrocution can occur even without direct
contact.
Keep all hydraulic lines, fittings, and
couplers tight and free of leaks. (Refer to
Safety Guidelines – Hydraulic Safety).
Use caution when ascending or descending
on the spreader. Wet shoes or boots are
slippery.
MAINTENANCE SAFETY
SAFETY
INSTRUCTIONS
Follow all operating, maintenance, and safety
instructions found in this Manual.
STOP
Before servicing, adjusting,
repairing, or unclogging the
machine, always make sure
the tractor engine is stopped,
key in your pocket, the machine is lowered to the
ground, all controls are placed in neutral, the
parking brake is set, and all the moving parts have
stopped.
Use sufficient tools, jacks, and hoists that
have the capacity for the job.
Use support blocks or safety stands when
changing tires or performing maintenance.
Follow good shop practices of
keeping the service area clean and
dry, and use adequate light for the
job at hand.
Before applying pressure to the hydraulic
system, make sure all lines, fittings, and
couplers are tightly secured and in good
condition.
Make sure all shields/guards are in place
and properly secured when performing
maintenance.