Art's-Way Manufacturing X900, Руководство оператора и иллюстрированный список запасных частей

Страница: 10 / 104

Manual No. 690940 ART’S-WAY MANUFACTURING COMPANY, INC.
8 SAFETY INSTRUCTIONS
GENERAL
Most work related accidents are caused
by failure to observe basic safety rules
or precautions. An accident can often
be avoided by recognizing potentially
hazardous situations before an accident
occurs. As you operate and maintain the
Spreader you must be alert to potential
hazards. You should also have the
necessary training, skills, and tools to
perform any assembly procedure.
Improper operation and/or maintenance
of this unit could cause a dangerous
situation that results in injury or death.
Do not use this unit until you read and
understand the information contained in
this manual. Do not use this equipment
for anything other than its intended
purpose.
Safety precautions and warnings
are provided in this manual and on
the unit. If these hazard warnings
are not heeded, bodily injury or
death could occur to you or to other
persons.
Art’s-Way Manufacturing Co., Inc.
cannot anticipate every possible
circumstance that might involve
a potential hazard. The warnings
in this manual and on the product
are, therefore, not all-inclusive. If a
method of operation not specifically
recommended by us is used, you must
satisfy yourself that it is safe for you
and for others. You should also ensure
that the unit will not be damaged or be
made unsafe by the methods that you
choose.
The information, specifications, and
illustrations in this manual are based on
the information that was available at the
time this material was written and can
change at any time.
Safety Alert Symbols
This is the safety alert symbol. It
is used to alert you to potential
personal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury or
death.
This manual contains DANGERS,
WARNINGS, CAUTIONS, NOTICES,
SAFETY INSTRUCTIONS, and NOTES
which must be followed to prevent the
possibility of improper service, damage to
the equipment, personal injury, or death.
The following key words call the readers
attention to potential hazards.
Hazards are identified by the “Safety
Alert Symbol” and followed by a signal
word such as “DANGER”, “WARNING”, or
“CAUTION”.
SAFETY
INSTRUCTIONS
Remember:
“The Best Operator is a Safe Opera-
tor”
CAUTION
Read and understand the opera-
tor’s manual and all the safety
decals before operating the
spreader. Review all safety instruc-
tions with all operators annually.
SAFETY INSTRUCTIONS