Art's-Way Manufacturing 6812B, Руководство оператора

Страница: 65 / 72

ART’S-WAY MANUFACTURING COMPANY, INC. Manual No. 590770 (August 2012)
DEALER ASSEMBLY INSTRUCTIONS
59
21. Service the harvester gearbox. Add SAE 90 oil is
required.
22. Install boom extension on 8 row 30 and 12 row 22
machines, see separate instructions.
23. Perform a visual inspection of the harvester. Make
sure of the following:
a. All bolts and screws are tight.
b. Roller chains, drive belts, and draper chains have
proper tension.
c. The PTO is properly installed and lubricated.
d. Hydraulic hoses, routing, and connections are
correct and secured.
e. Electrical wiring harnesses and connections are
correct and secured.
f. The gearbox has the proper oil level.
g. All shields, guards, access covers, and doors are
installed/closed.
h. Tires have correct air pressure.
HARVESTER ADJUSTMENTS
1. Adjust the harvester components to ensure ef fi cient
operation. (Refer to Harvester Adjustments).
ASSEMBLY INSTRUCTIONS 44 INCH
BOOM EXTENSION
SAFETY
INSTRUCTIONS
The harvester weights approximately 29,000
to 35,400 lbs (13,145 to 16,057 kg), depending
upon the header confi guration.
CAUTION
Crush Hazard
The harvester and its components
are very heavy and can cause
serious crushing injuries. Securely
block or fasten all parts before working under
or near them.
Use blocking that will safely support
load.
Use lifting devices rated to lift weight
of load.
A 44 inch (111.76 cm) fi xed boom extension is provided
for the 8 row 30 inch and 12 row 22 inch head.
1. The belted draper chain for the truck conveyor and
tank is shipped loose.
2. Remove the hoses from the hydraulic motor and
remove the truck conveyor from the tank. This
hardware will be reused to attach the truck conveyor
back onto the extension. Remove the lift cylinders
and tie out of the way.
3. Assemble rollers to extension frame, as shown.
4. Attach the 44 inch (111.76 cm) extension frame and
the two arms to tan, as shown.
5. Reinstall the truck conveyor to the extension.
6. Install appropriate draper chain in bottom and tank.
7. Install the draper chain extension onto the existing
chain. Install draper chain back into conveyor.
8. Install the extension hoses to the hydraulic motor.
9. Move the hydraulic cylinders to the new position.
Loosen and pull hoses from connection front left
corner of machine, install the extension hoses to
valve. The cross hoses can be tied to the 2 x 2 tube
on the extension.
10. Raise and lower the truck conveyor to assure proper
function. Run hydraulic motor to assure proper
function.
Figure 105b.