Art's-Way Manufacturing 6812B, Руководство оператора

Страница: 53 / 72

ART’S-WAY MANUFACTURING COMPANY, INC. Manual No. 590770 (August 2012)
LUBRICATION SCHEDULE
47
2. Hitch, Input Drive, and Row fi nder.
Figure 79. – Harvester Hitch Area
a. Hitch pin and swivel at tractor connection pivot.
b. Pivot at rear center of tongue.
c. Slide hitch to frame (2 zerks).
d. Pillow block bearings on short jackshaft and on
other side of double U-joint and center of long
jackshaft (4 zerks) (not shown).
e. U-joints (not shown).
f. Row fi nder (not shown).
3. Harvester Gearbox (Qty 2).
Figure 80. – Harvester Gearbox (3 On Wide Heads)
a. U-joints, 4 shafts of gearbox and head jackshafts.
b.

Check oil level in gearbox every 50 hours. Oil
level should be about half-way up shafts.
4. Header Lifter Wheels
a.

Lifter wheel hubs every 20 to 50 hours
depending on conditions.
5. Right Hand drives.
Figure 81. – Header Right-Hand Drive
a.

Flange block bearings on conveyor rolls and
center bearing of Star roll (2 zerks).
b.

Paddle shaft pillow block bearing.
c.

Slip clutch paddle shaft (if jaw clutch). Very
sparingly.
6. Left Hand drives.
Figure 82. – Header Left-Hand Drive. (8 Row Header
Shown)
a.

Flange block bearings on ends of conveyor
rolls and grabrolls (7 zerks).
b.

Paddle shaft pillow block bearings.
c.

Slip Clutch – Paddle shaft (if jaw clutch). Very
sparingly.