Spacer
Spacer
Tray
Figure 2
Slide a Spacer onto the round pegs (Fig. 2) located on
each side of the Tray. While holding the Spacers in place,
set the Tray into the slots on top of the Upper Y-Bracket
(Fig. 3) so that the Spacers are sandwiched between the
Tray and the Upper Y-Bracket.
With Tray resting in slots of the Upper Y-Bracket, attach
the Locking Knobs with screws and tighten (Fig. 4). Your
Projector Floor Stand is now ready for use. Your projector
can simply be mounted in the Tray facing either direction.
Caution:
When using the projector on the stand in a dark room,
take careful note where the electrical cord is. You may want to
loosely secure the cord to the bottom of the column to keep it out
of your way.
TRAY ASSEMBLY
2
3
Spacer
Spacer
Tray
Figure 3
Figure 4
Upper Y-Bracket
Tray
Screw
Locking Knob
Locking Knob
