manualshive.com logo in svg

artisan VME-SIO4A, Руководство пользователя

Поделиться
Скачать
artisan VME-SIO4A Скачать руководство пользователя страница 3

Revision B User Manual 

 for the VME-SIO4: Board Revision: A 

General Standards Corporation 

8302A Whitesburg Drive Huntsville, AL 3580, Phone: (256) 880-8787 

2

PREFACE 

 

Copyright © 1997 

General Standards Corp.

 

 

Additional copies of this manual or other 

General Standards Corporation

 literature may be obtained from: 

 

General Standards Corporation 

8302A Whitesburg Drive 

Huntsville, Alabama  35802 

Telephone:  (256) 880-8787 

Fax:  (256) 880-8788 

Company URL: 

www.generalstandards.com

 

The information in this document is subject to change without notice. 
 

General Standards Corporation

 makes no warranty of any kind with regard to this material, including, but not 

limited to, the implied warranties of merchantability and fitness for a particular purpose.  Although extensive editing 
and reviews are performed before release to ECO control, 

General Standards Corporation

 assumes no 

responsibility for any errors that may exist in this document.  No commitment is made to update or keep current the 
information contained in this document. 
 

General Standards Corporation

 does not assume any liability arising out of the application or use of any product 

or circuit described herein, nor is any license conveyed under any patent right of any rights of others. 
 

General Standards Corporation

 assumes no responsibility resulting from omissions or errors in this manual, or 

from the use of information contained herein. 
 

General Standards Corporation

 reserves the right to make any changes, without notice, to this product to improve 

reliability, performance, function, or design. 
 

All rights reserved 

 
No parts of this document may be copied or reproduced in any form or by any means without prior written consent of 

General Standards Corporation

. 

 
This user’s manual provides information on the specifications, theory of operation, register level programming, and 
installation of the VME-SIO4 board. 
 
Information required for customized hardware/software development. 
 
This manual assumes that the user is familiar with  the VMEbus interface specification.  In an effort to avoid 
redundancy, this manual relies on data books, other manuals, and specifications as indicated in the related 
publication section. 

Содержание VME-SIO4A














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды