artisan VME-SIO4A Скачать руководство пользователя страница 21

Страница: 21 / 45

Revision B User Manual

for the VME-SIO4: Board Revision: A

General Standards Corporation

8302A Whitesburg Drive Huntsville, AL 3580, Phone: (256) 880-8787

If this interrupt is enabled:

indicates an interrupt has occurred.

0 indicates an interrupt has not occurred.

If this interrupt is not enabled:

indicates the current status of this interrupt source.

being the source of the interrupt is present.

being the source of the interrupt is not present.

D12

Channel 2

Tx FIFO Not Empty Interrupt

If this interrupt is enabled:

indicates an interrupt has occurred.

indicates an interrupt has not occurred.

If this interrupt is not enabled:

0 indicates the current status of this interrupt source.

being the source of the interrupt is present.

being the source of the interrupt is not present.

D13

Channel 2

Rx FIFO Almost Full Interrupt

If this interrupt is enabled:

indicates an interrupt has occurred.

indicates an interrupt has not occurred.

If this interrupt is not enabled:

indicates the current status of this interrupt source.

being the source of the interrupt is present.

being the source of the interrupt is not present.

D14

Channel 3

Rx FIFO Not Empty Interrupt

If this interrupt is enabled:

indicates an interrupt has occurred.

indicates an interrupt has not occurred.

If this interrupt is not enabled:

indicates the current status of this interrupt source.

being the source of the interrupt is present.

being the source of the interrupt is not present.

D15

Channel 3

Rx FIFO Full Interrupt

If this interrupt is enabled:

indicates an interrupt has occurred.

indicates an interrupt has not occurred.

If this interrupt is not enabled:

indicates the current status of this interrupt source.

being the source of the interrupt is present.

being the source of the interrupt is not present.

Содержание VME-SIO4A














































Результаты поиска

Содержание VME-SIO4A

Отзывы:

Бренды по названию

Популярные бренды

artisan VME-SIO4A, Руководство пользователя

Результаты поиска

Содержание VME-SIO4A

Отзывы:

Бренды по названию

Популярные бренды