artisan VME-SIO4A Скачать руководство пользователя страница 16

Страница: 16 / 45

Revision B User Manual

for the VME-SIO4: Board Revision: A

General Standards Corporation

8302A Whitesburg Drive Huntsville, AL 3580, Phone: (256) 880-8787

3.1

All Reserved bits should be set to

for future compatibility. Also, the value read from a reserved bit will be

indeterminate.

3.1.1

BOARD CONTROL/STATUS REGISTERS:

3.1.1.1 Board ID Register:

D0..D16

Reads back hex CEAC

3.1.1.2 Device Type Register:

D0..D16

Reads back hex F4E4

3.1.1.3 Board Control Register:

Board Reset L (pulsed)

will generate a self-timed pulse that will reset the board.

(There is no need for the software to return to clear this bit)

will not generate a self-timed pulse that will reset the board

(There is no need for the software to return to clear this bit)

Enable Interrupts

will enable this board to generate VME interrupts.

will disable the board from generating VME interrupts.

D2..3

Reserved

Spare LED On (A software controlled bit.)

will turn

off

the Fail LED

will turn

the Fail LED

D5..6

Reserved

Fail LED On L (A software controlled bit.)

will turn

off

the Fail LED

will turn

the Fail LED.

D8..D15

Reserved

3.1.1.4 Board Status Register:

D0..D15

Reserved

3.1.2

I/O CONTROL REGISTERS:

3.1.2.1 Channel 0 Control Register: (same format for Channels 1..3 Control Registers)

Reset Tx Buffer (pulsed)

will generate a self-timed pulse that will reset the Tx Buffer.

(There is no need for the software to return to clear this bit)

Reset Rx Buffer (pulsed)

will generate a self-timed pulse that will reset the Rx Buffer.

(There is no need for the software to return to clear this bit)

Enable interrupts for channel number.

will enable this board to generate interrupts for this channel number.

will disable the board from generating interrupts for this channel number.

Reserved

Содержание VME-SIO4A














































Результаты поиска

Содержание VME-SIO4A

Отзывы:

Бренды по названию

Популярные бренды

artisan VME-SIO4A, Руководство пользователя

Результаты поиска

Содержание VME-SIO4A

Отзывы:

Бренды по названию

Популярные бренды