Artila Matrix-605, Руководство пользователя

Страница: 9 / 15

Matrix-605 User Guide
‧
5
‧
3.10 Factory Default Settings
LAN 1:
IP setting: DHCP
LAN 2:
IP Address: 192.168.2.127
Serial Console Port:
Baud rate: 115200
Data format: 8 Bits, No Parity, 1 Stop bit (N, 8, 1)
Flow Control: None
Terminal type: VT100
3.11 Power on and System Boot up
Once Matrix-605 is correctly power on, you can see the message prompt from the serial console port.
The system starts from the initial table and a batch file, autoexec.bat which is located at \NandFlash
will follow up. Therefore user can edit the autoexec.bat file or init table for your auto run program.
To skip the autoexec.bat, please repeatedly key $ (shift+4) right after system boot up.
3.12 Initial Table
WinCE uses initial table to decide the order of program/service to start after power on. You can use
init command to configure the initial table as follow:
Number 70 is Artila Manager and Number 71 is WinCE remote display control.