19
NETWORK CONFIGURATION
The unit has two RJ45 network ports, one is for the SHURE MXA310 microphone,
and the other is to control and power the mechanical unit.
As explained on chapter before, using the AHlink connection, you will access to
the network configuration using password “8345”.
Here you can configure the IP address to connect to the device and send AHnet
commands to open and close the unit using 2002 port. There is an option to
configure is this connection will be permanent, or the unit will close the port
after 5 minutes with no activity on network.
The unit can control the MUTE and UNMUTE microphone when the unit is closing.
First, do you need to configure the microphone IP, and the unit will always send
to the SHURE MXA310 microphone an unmute command when the unit is closing.
On first AHlink page, the user can configure that the unit will UNMUTE the
microphone when the unit opens.
