17
AHlink
SERIAL
Serial number of the unit
VER
Firmware version
MOV
Control for microphone lift, Open and Close the
mechanical function
AHNetRx
Last AHnet command received
SENSORS: Indicates sensor status.
S1: Mechanical close sensor. The sensor is ON
when the device is closed
S2: Open and Close cover plate sensor switch.
The sensor is OFF while pressing the Open and
Close cover plate button
S3, S4: Not used
POSITION: Actual position of the mechanics
MIC UNMUTE WHEN OPENING
The microphone will always unmute when
closing the unit. But when the unit opens:
ON: The microphone unmute when the unit
opens
OFF: The microphone remains mute when the
unit opens
NOTE: Do you need to configure the
microphone IP to activate this
IP ADDRESS
Information of the device’s IP address
MASK
Information of the device’s MASK
COMMAND
Information of the last AHnet
command received from RS422 port
GATEWAY
Information of the device’s gateway
CONFIGURATION PSW
To change the network configuration use
“8345” password and the next network
configuration page will appear
