Arthrex Synergy AR-9800 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 60

background image

Product Description and Intended Use

Synergy

RF™

User’s Guide

DFU-0221-6r0_fmt_en-US

Page 19 of 58

2.2.4

AR-9800 Display Messages

The console's Touch Screen Display [5] provides information about the status of
the AR-9800 settings in real time. A list of informational and error messages is

shown in Table 4 below. Messages shaded in gray denote that Arthrex technical
support should be contacted for further instructions. Error display messages
reported to Arthrex technical services should include the Error Message and
Error Code for reference (See Figure 4).

Table 4

AR-9800 Display Messages

Message

Explanation

"Ablation Footswitch Stuck"

A button on the foot switch is stuck. Replace

the foot switch.

"COAG Footswitch Stuck"

A button on the foot switch is stuck. Replace

the foot switch.

"PROBE Already Used"

The RF device attached to the console has

either been previously used, or has been

disconnected and reconnected. Replace with a

new device.

"PROBE Communication Failure"

Communication with the RF device has been

lost. Check the connection and replace the

device, if necessary.

"Replace Probe"

The RF disposable device attached to the

console is malfunctioning.

"System Temperature Failure"

The console temperature is outside of normal

parameters, contact Arthrex technical support.

"Turn off and let cool down"

The console has overheated. Power off the

console for 10 minutes.

"WRAP Footswitch Stuck".

A button on the foot switch is stuck. Replace

the foot switch.

"Contact Technical Services"

Contact Arthrex technical services.

"Configuration File Corruption"

Contact Arthrex technical services.

"Critical Failure"

A terminal fault has occurred, contact Arthrex

technical services.

"LCD File Version Failure"

Touch panel failure, contact Arthrex technical

services.

"LCD Communications Failure"

Touch panel failure, contact Arthrex technical

services

"Main Calibration Required"

Contact Arthrex technical services.

"Power Supply Calibration

Required"

Power supply self-check failure, contact

Arthrex Technical Services.

"Power Supply Communications

Failure"

Power supply self-check failure, contact

Arthrex technical services.

"Power Supply POST Failure"

Power supply self-check failure, contact

Arthrex technical services.

«
...
19
20
21
22
23
...
»

Содержание Synergy AR-9800





























































Отзывы:

Нет отзывов

Похожие инструкции для Synergy AR-9800

Бренд: Walker Bay Страницы: 8

Бренд: Tacx Страницы: 2

Бренд: C.E. Nierhoff & Co Страницы: 7

Бренд: Makita Страницы: 8

Бренд: VECTECH Страницы: 5

Бренд: Yamaha Страницы: 78

Бренд: Fast Страницы: 42

Бренд: DARAY Страницы: 28

Бренд: Haenim Страницы: 2

Бренд: Hanna Instruments Страницы: 2

Бренд: Hanna Instruments Страницы: 2

Бренд: Hanna Страницы: 12

Бренд: Hanil Страницы: 24

Бренд: Hanil Страницы: 32

Бренд: Hanil Страницы: 24

Бренд: Madrigal Страницы: 5

Бренд: MacDon Страницы: 504

Бренд: U-Line Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды