
Setup & Use
NanoScope Manual
DFU-0298-1, Revision 0
Page 24 of 38
7.
Place the trocar/obturator on sterile field for later use.
8.
If needed, attach a fluid source via a luer fitting.
9.
Insert the NanoScope Handpiece into the cannula.
Figure 9
Insert NanoScope Handpiece into cannula as shown.
10.
Visualize the cavity/joint.
11.
Administer fluid as needed to aid in visualization.
12.
If needed, use the additional cannula provided in the kit. Then, repeat the steps
above to establish a second portal.
13.
Use the NanoScope Handpiece buttons to capture images or video.
14.
The NanoScope Console display can be used to capture images, videos, etc.
(Note: The Console is not sterile and should only be used by someone not
interacting with the sterile Handpiece.)
Содержание NanoScope
Страница 43: ...This page intentionally left blank ...