ArtFox Pointy 10R, Руководство пользователя

Страница: 12 / 28

12
Truss installation
1.Bolt each clamp (1) to the omega holder (3) with M12 bolt and lock nut through the hole in the holder.
2.Fasten the omega holders on the bottom of the base by inserting both quick-lock fasteners (4) into the holes
of the base and tighten fully clockwise.
3. Pull the safety wire (2) through the attachment point and around the truss (6).
1 -Clamps
2- Safety wire
3- Omega holder
4- Quick-lock fastener
5- Attachment point
6 -Truss
Alternativelly, fixtures handels can be used for safety attachment
Wheninstallingfixturesside-by-side,
avoid illuminating one fixture with another!
DANGER TO LIFE!
Before taking into operation for the first time,the installation has to be approved by
an expert!