manualshive.com logo in svg

ARTEX 570-2225, Руководство пользователя, Страница: 19 / 33

Поделиться
Скачать
ARTEX 570-2225 Скачать руководство пользователя страница 19

ARTEX AIRCRAFT SUPPLIES 

 

Document # 570-2225 

 

The 32 digit hex code from BCNCODES is shown in the box at the top of the screen, 
and the abbreviated 15 digit hex code is shown in the box beneath. 

 

Click on the “WRITE ELT” button (or hit “ENTER” on the keyboard if the “WRITE 
ELT” button is highlighted) to program the ELT.  Close the temporary programming 
window when programming is finished. 

6.5  Printing ELT Programming Data 

6.5.1

 

Check that a printer is connected to the printing destination that is selected under the 
“PrinterPort” menu.  To print the hex code that appears at the top of the main 
programming window and a decoded breakdown of its meaning, click the “PRINT” button 
with the mouse.  This will provide a printout in the preferred format.   

 

If BCNCODES is enabled, clicking the “PRINT BCN” button will print a BCNCodes 
format printout to LPT1 or LPT2, only if the direct LPT1 or LPT2 printer port selection is 
chosen.  This does not work with Windows/network printers.  This format is less preferred.  
If a BCNCodes printout must be printed on a Windows/network printer, click the window 
icon at the top left of the BCNCodes window to edit-mark, cut, and paste the screen into 
another program for printing. 
 

 

  Page 

15 

 

Содержание 570-2225


































Отзывы:

Нет отзывов