Artesyn 6806800U73A, Инструкция по установке и использованию

Страница: 28 / 54

Hardware Preparation and Installation
PCIE-6001 Installation and Use (6806800U73A )
28
2.2.2 Power Requirements
The PCIE-6001 payload card accepts single and double-sided modules up to a power
consumption of 10W per module. The module interface must comply with the NVMe
(NVMExpress) standard. In case of MaxCore platforms, the MaxCore system reads the thermal
sensors and provides sufficient cooling.
The following table provides the typical power consumed by the PCIE-6001 card.
Vibration (vertical) 10 Min 0.01G (sinusoidal)
5 – 200Hz -
Vibration (transverse) 10 Min. 0.01G (sinusoidal)
5 – 200Hz -
Vibration (longitudinal) 10 Min. 0.01G (sinusoidal)
5 – 200Hz
-
Freefall - 1200 mm/all edges and
corners (packed state) 100
mm/3 axis (unpacked)
Altitude Sea level
Table 2-1 Environmental and Thermal Requirements (continued)
Requirement Operating Non-Operating
Table 2-2 Power Requirements
Mode PCIe slot power
Idle 15 Watts
Active 52 Watts
Peak 75 Watts
Idle : Drives are powered, but not being actively utilized.
Active : When the drives are being utilized at room temperature.
Peak : When the drives are being utilized at 40°C ambient temperature.