manualshive.com logo in svg

Artesyn Embedded Technology ATCA-7370, Инструкция по установке и эксплуатации

Поделиться
Скачать
Artesyn Embedded Technology ATCA-7370 Скачать руководство пользователя страница 192

Supported IPMI Commands

ATCA-7370/ATCA-7370-S Installation and Use (6806800P54G

)

192

The following table lists the boot parameters that can be configured for the ATCA-7370 blade 
using the system boot option parameter #100. 

Artesyn Embedded Technologies provides the tool “named ipmibpar”, which is included in the 
BBS, to interpret the boot options stored in the IPMC.

2

[7:4] - reserved
[3:0] - parameter version. 1h is returned.

3

Parameter Valid
[7] - 1b = the storage area is locked.
        0b = the storage area is unlocked
[6:0] - parameter selector (must be 100).

4 .. 19

Boot Option Data 

Table 8-14 System Boot Options Parameter #100 - GET Command Usage (continued)

Byte

Description

To detect the size of the whole storage area, a series of read commands can be issued with 
the block selector in 1 increment. Once the error code C9 is returned, the limit has been 
reached and the total available space of the storage area can be determined by the block 
selector of the last issued command.

This is supported by HPI, for details refer to the 

System Management Interface Based on HPI-B 

User’s Guide

 related to your system environment.

The boot parameters and their values mentioned here are all case-sensitive. 

All boot options listed in the following table are set by the BIOS setup menu and can be 
configured using the System Boot options command #100. The IPMC and BIOS software 
automatically synchronize the settings made in the BIOS setup menu and the settings 
specified using the System Boot Options command #100. Changing a parameter in either of 
these, automatically changes the respective value in the other. 

Содержание ATCA-7370





























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды