Artesyn Embedded Technology ATCA-7370, Инструкция по установке и эксплуатации

Страница: 141 / 252

Maps and Registers
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54G)
141
They are cleared only by reading LSR. In FIFO mode, the line status interrupt occurs only when
the erroneous byte is at the top of the FIFO. If the erroneous byte being received is not at the
top of the FIFO, an interrupt is generated only after the previous bytes are read and the
erroneous byte is moved to the top of the FIFO.
Table 6-37 Line Status Register (LSR)
LPC IO Address: Base + 5
Bit Description Default Access
0 Receiver data ready (DR) indicator
DR is set whenever a complete incoming
character has been received and transferred
into the RBR or the FIFO. DR is cleared by
reading all of the data in the RBR or the FIFO:
1: New data received
0: No new data 0 LPC: r
1 Overrun error (OE) indicator
When OE is set, it indicates that before the
character in the RBR was read, it was
overwritten by the next character
transferred into the register. OE is cleared
every time the CPU reads the contents of the
LSR. If the FIFO mode data continues to fill
the FIFO beyond the trigger level, an overrun
error occurs only after the FIFO is full and the
next character has been completely received
in the shift register. An overrun error is
indicated to the CPU as soon as it happens.
The character in the shift register is
overwritten but it is not transferred to the
FIFO:
1: Overrun error occurred
0: No overrun error 0 LPC: r