Artesian Spas PLATINUM ELITE, Руководство пользователя

Страница: 29 / 76

THE SETTINGS SCREEN
23
Heat Mode
Heat Mode indicates if the spa is Ready mode or Rest Mode. The heat
mode will be displayed in the bottom right screen of the main screen dis-
play.
Ready Mode:
In ready mode the heater will maintain the set temperature. If your Plati-
num Elite spa is not programmed for 24 hours Filter it will turn on the
circulation pump every half an hour to test the water temperature. If the
water temperature is one degree below the set point the circulation pump
will continue to run to bring the water temperature to the set point tem-
perature.
If the water temperature is at the set point temperature the circulation
pump will turn off after 5 minutes.If your filtration cycle is set for 24 hours,
the circulation pump will continue to run.
Rest Mode:
Will only allow the spa to heat during a filtration cycle.
If the spa is not in a filtration cycle, you can press the pump 1 pump to
activate the heater. The spa will go into Ready mode for 1 hour and then
go back to rest mode.
Jet 5/Select Button:
When the heat mode is highlighted in the Settings Menu pressing
the Select Button will change from Ready to Rest or Rest to Ready.
Jets 4/Navigate Left Button:
Press the left button to high light the Back Icon