Piano Assembly
Continued
(Bottom view)
5.
Finish attaching the piano to the stand by using the two
Bolts(C) to attach the bottom of the piano to its stand.
(Bottom view)
PLEASE NOTE
At least 2 people are needed to complete the assembly.
DO NOT CONTINUE WITHOUT HELP.
!
4.
Lift the piano onto the stand and slide forwards,
pushing the guide rods on the bottom of the piano into
the slots on the piano legs. Shown Below.
PLEASE NOTE
When lifting the piano onto its stand , be careful
not to catch/trap hands or fingers.
!
PLEASE NOTE
Tighten all screws securely to ensure that the piano
is securely attached to the stand. Failure to do so
may result in serious injury
!
Power Pedals
Bottom Front of the piano
6.
Attach the AC Power Cord and Pedal Cable into their
connectors on the bottom of the piano as shown.
Bottom Rear of the Piano
PLEASE NOTE
The pedal cable is located underneath the pedal board
!
3.
Using four TAPPING SCREWS(E), and twoBOLTS ,
C
(D)
E
E
E
E
D
D
C
, attach the back panel to the stand as shown.
Lift onto stand,
slide forward,
