What’s Included
Piano Assembly
Unboxing Your Piano
Pedal Board
Legs (2)
Piano
Back Panel
Not pictured:
Thumb Drive/Song Library,
Documentation, USB cable,
Audio Connection Cable,
Power Adapter
2.
Begin assembly by the att
a
ching the pedal board to
Nuts(A)
Bolts(B) M6X55
Bolts(C) M6X16
Bolts(D) M4X12
Bolts(F) M6X20
Tapping Screws(E) ST3.9X16
Plastic Caps(G)
1.
Place the cylindrical nuts(A) in
to
the holes on the side of
each leg with
the
Phillips slots facing toward you for each nut.
Use a screwdriver to rotate the cylindrical nut(A) into
position so that the nut’s threaded hole lines up with the hole on
the bottom of each leg.
Align the rear leg with the foot so the foot points away from the
back panel bracket. Then insert the four BOLTS(B) through the
bottom of the foot and screw it into the cylindrical nut until tight.
Do this for each of the nuts in both rear legs.
the
piano legs. With the pedals facing forward towards
the front of the legs, attach the pedal board using four
BOLTS(F), as shown.
Place the four plastic caps(G) into the holes above the
foot in each rear leg.
G
A
Back
Panel Bracket
B
F
G
G
F
A
Back
Panel Bracket
B
d
Phillips Screwdriver
