Artel Hydro Insert 17, Руководство пользователя

Страница: 38 / 46

38
EN
Maintenance and cleaning
◊ by the user / • by the authorised quali ed technical assistance
All cleaning of all parts must be carried out with the Hydro Insert completely cold
and unplugged to avoid burns and thermal shock. The Hydro Insert does not need
much maintenance if used with certi ed quality pellet. The need for maintenance
varies depending on the conditions of use (switching on and off repeatedly) and
depending on the performance required. It is recommended periodic monitoring
of the Hydro Insert to check its condition.
Parts Everyday
Every 2-3
days
Every
week Every 15
days
Every 30
days
Every 60-
90 days
Every 1
year
Brazier ◊
Cleaning the ash collection
compartment with suction device
◊
Cleaning ash tray ◊
Cleaning the interior heat exchanger /
smoke fan compartment
•
Cleaning complete exchanger •
Clean "T" to exhaust •
Flue •
Door gasket ash •
Internal parts •
Flue pipe •
Circulation pump •
Hydraulic components •
Electromechanical components •
The Hydro Insert requires a simple and thorough
cleaning in order to ensure a more ef cient
performance and smooth operation. While
cleaning the inside of the Hydro Insert, to prevent
the escape of ashes, you can start the fan ue
exhaust. Clean the grate from the ash and any
incrustation which could obstruct the passage of
air. In the case of depletion of pellets in the tank
may accumulate unburned pellets in the burn pot.
Always empty the residuals from the grate before
each start. Remember that only a brazier located
and clean properly can ensure ignition and optimal
operation of your Hydro Insert. When positioning
the crucible, carefully check that the ends of the
pads completely adhere to their home and that
the hole with pipe dedicated to the passage of the
resistance. There should be no residual combustion
in the contact zone between the edges of the
crucible and the support surface on the door
crucible.
BY THE USER
Daily control