WIRING
saTECH RIO
|
User´s
Manual | Rev. 1.0
16
6.2. Power supply terminal
Power supply + IRIG B: 10-pin terminal
block with 5.08mm pitch.
Clamping section with minimum and
maximum connections of 0.13 mm2 and 4
mm2, respectively, and minimum and
maximum AWG conductor connection
sections of 30 and 12, respectively.
6.3. Communications
6.3.1.
Connections on the unit’s front panel
The front of the saTECH RIO is equipped with a connector with 2 USB ports and an
Ethernet port with an RJ45 terminal and a mini-USB port for diagnostic and maintenance
tasks.
RJ45 Ethernet connection. The use of a UTP CAT5e cable is recommended.
USB connection. Intended for USB sticks.
MiniUSB connection. For maintenance purposes. The use of a miniUSB to USB
Type A Cable of less than 2m in length is recommended.
Figure 7.
Detail maintenance ports
Содержание saTECH RIO
Страница 1: ...saTECH RIO User s Manual...
Страница 27: ...www arteche com Arteche...