ARTE NEAT 70, Инструкция по установке и эксплуатации

Страница: 8 / 28

I
NSTALLATION
& U
SERS
M
ANUAL
FIREPLACE
| NEAT 70/80/90
7 | Page
10. Reverse the locking hook as shown in the image, screw the stud and the screw and tighten the jam nut.
(Pic. 5.1.10)
11. Place the rod to the opposite side and screw the locking hook and the handle by using the hexagon socket set screws you removed
earlier.
(Pic. 5.1.11)
12. Screw the decorative handle on the opposite corner. (Pic. 5.1.12)
13. Install the locking studs on the left side by using the screws you removed earlier.
(Pic. 5.1.13)
14. Install the hinges on the right side by using the screws you removed earlier.
(Pic. 5.1.14)
15. Ensure that the washer is on the upper hinge. Install the door by using the retaining ring you removed earlier.
(Pic. 5.1.15)
16. Hook up the spring to the right socket.
(Pic. 5.1.16)
17. Screw the other side of the spring by using the jam nut and the hexagon socket screw.
(Pic. 5.1.17)
18. If it is necessary to adjust the door’s alignment by using the hexagon socket set screws of the upper hinge. (Pic. 5.1.18)
6. F
IRE
S
AFETY
It is OBLIGATORY to respect the National and European rules and local regulations concerning building matter and fireproof rules.
The installation MUST be inspected by a qualified auditor, prior to lighting the fireplace. Also the appropriate local authorities must be
informed.
6.1. Safe distances
The combustion chamber opening must be AT LEAST 80cm away from any flammable materials that are inside the heat radiation zone.
The safe distance from flammable materials below the appliance must be at least 30 cm (Pic. 6.1.2) . The distance to the side and the rear
Pic. 5.1.10 Pic. 5.1.11 Pic. 5.1.12
Pic. 5.1.13 Pic. 5.1.14 Pic. 5.1.15
Pic. 5.1.16 Pic. 5.1.17 Pic. 5.1.18