Art-Tech F-14 "TOMCAT" JET, Инструкция по эксплуатации

Страница: 7 / 16

WWW.ART-TECH.COM
6
Functions for control set
Mode
Ⅰ
Elevator down
Rudder
left
Throttle Max
main wing(D/R)
sweepback adjustment switch
sweepback
adjustment trim switch
Trainer switch
Dual Rate
(D/R) Switch
Model No.:
Number of channels:
6
Working current:
≤2 0 0 m A
Working frequency:
: 2 . 4 G H z
EF LY - 6 BⅡ
Work voltage
: 12
V
5#(
AAA
)
dry batteries
,
or
9.6
V Ni
-
mh battery
Air R/C distance
: 400
m
Land R/C distance
: 200
m
Certification:FCC
,
CE
Specifications
:
Charger port
Frequency Binding Switch
Servo reverse switch
Power switch
Power indicator
Hook
Handle
Antenna
Trim
Dual Rate(D/R)
Trim Switch
Elevator up
Rudder
right
Throttle Min
Left
Aileron
Up Right
Aileron
Up
Notice
1.When turn on the power of the transmitter, the throttle should be in the lowest position. The power of the transmitter should be
turn on first, and then turn on the receiver.
2.The transmitter can not work properly if the frequency bind button is pressed down neglectfully. In this case, The transmitter
and the receiver must be bind again. More details , please refer to the process of frequency bind for 2.4GHz R/C system for
reference.
3.Please do not turn on several RC devices and bind them at the same time, bind only one set of RC device at
one time. The RC device should not be stay in bind state for a long time.
4.You will need 8 AA batteries for operating the transmitter.
5.Servo reversing switches
If the direction of servo operation is not the same as the model, adjust the reversing switches to reverse the direction.
The lower position is the normal setting and the
upper position is the reverse setting.
Channel display
AIL.: Aileron (Ch1) ELE.: Elevator (Ch2) THR.: Throttle (Ch3) RUD.: Rudder (Ch4) REV.: Reverse NOR.: Normal