Art-Tech F-14 "TOMCAT" JET, Инструкция по эксплуатации

Страница: 12 / 16

WWW.ART-TECH.COM
11
Adjustment step of F-14 "TOM CAT"
1.
Turn on the transmitter, make sure the throttle is on the
lowest position, connect the flight battery to the ESC then
put it into the battery box.
2 .
Make sure the main wing control servo works normally,
move the switch on the right of the transmitter upward,
the main wing was in the max. sweepback, move the
switch on the right of the transmitter downward, the
main wing was in the min.sweepback,
3.
Function of the right knob of the transmitter:turn the
knob and make the main wing reach the min. sweepback,
now by turning the knob you can put the main wing in any
position between the max. and min. sweepback.
4 .
Please practice using this function to gain the amount of
sweep you want and become familiar with its operation.
5.
Put the aileron trim switch in the middle position, then
make sure the aileron surface on the middle position and
turn correctly, no reverse switch.
6.
Put the rudder trim switch in the middle position, then
make sure the front landing gear on the middle position
and turn correctly.
1 8 ．
completed F-14 TOM CAT after assembly.