background image

No. : 51049
Cabin

 

set

13

Spare parts list

No.: 51019
Fuselage set

No.: 51029
Main wing set

No.: 51039
Horizontal tail plane

No.: 35023
Servo set

No.: 3302A
20A Brushless ESC

No.: 3A01Q
Motor set
(dst-1200 brushless) 

No. : 36012
Charger

No.: 51059
Nose cowl

No.: 41411
Li-Po

 

Battery

(11.1V, 1300mAh) 

4.  If the motor runs slowly or the thrust is not powerful, please do not take it off. Check if the battery has been 

fully charged, and if there is any problems with the motor or ESC. The power system can be adjusted during 
flying  to  save  power  and  lengthen  the  flying  time,  and  the  recommended  method  is  flying---gliding—flying.

5.  If you want to land it after flying for some time, pull the throttle stick to the low position and let it land gently.
6.  After  landing,  plug  off  the  battery  power  system  and  then  switch  off  the  transmitter,  otherwise  it  will  give 

wrong instruction to the motor.

7.  If  the  battery  voltage  of  the  transmitter  is  under  the  safety  standard,  the  indicator  will  become  red.  Now 

please land it as soon as possible to avoid it being out of control.

8.  If the model always towards to right, please adjust the trim on the transmitter to the left until the model could 

fly straightly. If the airplane always turn to left, move the inching switch to the right.

9.  If the model plane flies nose-down, move the elevator trim to the lower position; If the model moves nose-up 

or if there is any undulating flight, adjust the elevator trim upwards until level flight. If the trim has reached the 
limits, please adjust the steel wire grip to make the flight back to normal.

Содержание ASK-21

















Отзывы: