Arroyo Instruments TECPak 586 Series, Руководство пользователя, Страница: 16 / 40

Page 16 · 586 TECPak User’s Manual
Connecting to the TECPak
Arroyo Instruments carries two cable assemblies specifically designed for
connecting the 586 TECPak to temperature controlled fixtures or devices. The
1264 TECSource Cable (not included) is a two meter cable, designed for use
with Arroyo Instruments mounts, and has 17W2 connectors on both ends.
For custom applications, a two-meter cable with a male 17W2 on one end and
stripped and tinned leads on the other is available as part number 1265 .
See the manual for your fixture for additional safety and operational information.
Installing the USB Drivers
Using the
TECPak via USB is just as simple as using the serial port. In fact, once
you have installed the USB drivers, the instrument will appear as a virtual serial
port that you can use just like a normal serial port.
To install the drivers, simply plug in the instrument to your computer. When the
Add New Hardware wizard appears, insert the CD you received with the
TECPak
and follow the on-screen instructions.
Once the drivers are installed, to determine the COM port number, go to
Control
Panel and select System . Once the System Properties dialog appears, choose
the Hardware tab then click on the Device Manager button. When the Device
Manager appears, click on the plus sign to the left of Ports . The port identified
as an USB Serial Port i s the TECPak . In the event you have multiple TECPaks
plugged in simultaneously, you will need to experiment to see which instrument
was assigned to which port. For example, you could change the set point when
the output was off to see which unit’s set point changed.
Saving and Restoring Configurations
Using the the *SAV and *RCL commands over the computer interface,
TECPak
allows you to save up to four configurations. Each configuration will store all of
the instrument settings (except scripts and user calibration data), and allow you
NOTE
Connections to the 586 TECPak and the fixture must be
secure. Tighten any screws on the 17W2 connectors,
and make sure all connections are in good condition.