WARNINGS
WARNING: WHEN CRUSH IS NOT ATTACHED TO
VEHICLE, LOWER FRONT HITCH JACK TO THE
GROUND FOR SAFETY.
ALWAYS LOWER UNIT TO THE GROUND
IMMEDIATELY WHEN TRANSPORT IS COMPLETE.
WHEEL NUTS / BOLTS SHOULD BE TORQUED
BEFORE FIRST ROAD USE AND AFTER EACH
WHEEL REMOVAL.
DO NOT REPAIR THE CRUSH OR GO INTO THE
CRUSH WHEN HYDRAULICS ARE IN OPERATION.
THIS CAN RESULT IN INJURY TO THE WORKER.
UNPLUG THE MOTOR BEFORE PERFORMING ANY
NECESSARY REPAIRS OR INSPECTION.
DO NOT ATTEMPT TO CONNECT THE ELECTRIC
POWER PACK IF YOU ARE NOT A CERTIFIED
ELECTRICIAN. FOR YOUR SAFETY, ELECTRIC
POWER PACKS MUST BE CONNECTED AND
WIRED BY A FULLY CERTIFIED ELECTRICIAN.
Содержание Q-POWER 107 Series
Страница 39: ...3 Slide Scale Platform underneath SCALE PLATFORM INSTALLATION 36...
Страница 41: ...1 Remove rolling door handle slider 2 Remove the rolling door from the main frame ROLLING DOOR SWITCH 38...
Страница 42: ...3 Remove the rolling door track plate and switch to the opposite side 39 ROLLING DOOR SWITCH B A...
