9
Instant/Delay Mode
Your system will normally arm in the Delay Mode when leaving the
premise. This will delay arming, allowing time to exit. When entering,
the alarm will be delayed allowing time to disarm the system. The
audible warning device will sound during the entrance delay remind-
ing you to disarm the system. The Instant Mode is primarily used in
residences. If this is desired, the key sequence is as follows:
If a zone(s) are to be bypassed in conjunction with entering the Instant
mode or the group bypassing is desired simply enter the zone
number(s) or the [* 1] prior to the [*] key in the sequence above.
Arming/Disarming Reports By User
The Arming and Disarming by user code identifies the user who
disarms and arms the system. This is accomplished by assigning an
individual user code to each of the eight possible users. The primary
user code is always reported as user one. Seven additional secondary
user codes report as user 1-7. Select secondary codes as shown in
Changing Code(s) From the Keypad Section.
Testing the Communicator
Your installer should instruct you on how to test , and how often to test
the communicator portion of your system. Various central monitoring
stations have different procedures for testing the communicator. Your
installer is familiar with this procedure.
