7
Disarming And Silencing Your System
(when ARMED light is on)
To Disarm your system, enter your User Code and the (#) key.
If you disarm your system on the LCD keypad, the armed light (RED)
is off and the LCD display will show READY if all zones are secure, or
VIOLATED if one or more zones are not secure.
(On the LED Keypad, the status light will turn "Off" when the system
is disarmed. All zone lights will be "Off" when ready to arm. If a zone
is violated, the corresponding light will be "On".)
RECOMMENDATION: If, when arriving home, the burglar alarm is
sounding, contact police from a nearby location.
DO NOT ENTER YOUR RESIDENCE.
Arming Your System
If the READY light is lit on the LCD keypad (or all zone lights OFF on
the LED), all zones may be armed by entering your User Code, using
the key sequence below. When the READY light is not lit, the LCD
display will show VIOLATED and scroll through the zone descriptions
of the zones that are not secure. Zone lights on the LED keypad will
be lit to show which zones are not secure.
Your system is now armed. The LCD ARMED light is on and the display
shows ARMED. The LED STATUS and all secured zone lights are lit.
NOTE: If your installer has enabled the "Defeat Lockout" feature,
an exit door or motion detector may be violated when arming. This
zone will be part of the system at the end of the Exit Delay Time.
If the zone is left open after the exit time an alarm condition will
result.
