CY8CKIT-049-4xxx PSoC® 4 Prototyping Kit Guide, Doc. #: 001-90711 Rev. *J
7
1.
Introduction
Thank you for your interest in the PSoC
®
4 CY8CKIT-049-4xxx family of prototyping kits. The
prototyping kit is designed as an easy-to-use and inexpensive prototyping platform for users wishing
to rapidly develop products using the PSoC 4 families and use the unique flexibility of the PSoC 4
architecture. Designed for flexibility, these kits offer an open footprint breakout board to maximize
the end utility of the PSoC 4 device. These kits provide a low-cost alternative to device samples
while providing a platform to easily develop and integrate the PSoC 4 device into your end system.
In addition, the board includes the following features:
■
Onboard CMOD capacitors to enable CapSense
®
development
■
A bypass capacitor to ensure the high quality ADC conversions
■
An LED to provide feedback
■
A push button to provide a simple user input and trigger the bootloader programming mode
■
The CY8CKIT-049-41xx PSoC 4 Prototyping kit has
device on-board and
CY8CKIT-049-42xx PSoC 4 Prototyping kit has
device on-board
The CY8CKIT-049-4xxx development kit also supports the Cypress USB-Serial CY7C65211
Full-Speed USB controller that enables PC connectivity and serial interfaces, such as USB-UART,
USB-I2C, USB-SPI, and USB-GPIO. The development kit includes a Cypress USB-Serial controller
used to bootload the target PSoC 4 device. The PSoC 4 prototyping board is breakable, allowing
you to separate the USB-Serial board from the PSoC 4 board.
This kit supports either 5 V or 3.3 V power supply voltages. The device can be programmed using
the bootloader or the Cypress MiniProg3 programmer. The PSoC 4 Prototyping Kit supports boards
based on the 4100 and 4200 device families, delivering a programmable platform for a wide range of
embedded applications at a very low cost. The PSoC 4 is a scalable and reconfigurable platform
architecture for a family of mixed-signal programmable embedded system controllers with an ARM
®
Cortex™-M0 CPU. It combines programmable and reconfigurable analog and digital blocks with
flexible automatic routing.
1.1
Kit Contents
This kit contains only the PSoC 4 Prototyping Kit, either the 4100 or 4200 series device.
Figure 1-1. PSoC 4 CY8CKIT-049-4xxx Prototyping Kit
Содержание verical CYPRESS CY8CKIT-049-42 Series
Страница 66: ...CY8CKIT 049 4xxx PSoC 4 Prototyping Kit Guide Doc 001 90711 Rev J 65 Appendix ...
Страница 67: ...CY8CKIT 049 4xxx PSoC 4 Prototyping Kit Guide Doc 001 90711 Rev J 66 Appendix ...
Страница 68: ...CY8CKIT 049 4xxx PSoC 4 Prototyping Kit Guide Doc 001 90711 Rev J 67 Appendix ...
Страница 69: ...CY8CKIT 049 4xxx PSoC 4 Prototyping Kit Guide Doc 001 90711 Rev J 68 Appendix ...
