CY8CKIT-049-4xxx PSoC® 4 Prototyping Kit Guide, Doc. #: 001-90711 Rev. *J
46
Code Examples
12.Because the project is not designed for the CY8CKIT-049 kit, you need to change the PWM out-
put pin to the LED pin in CY8CKIT-049 (P1[6]). To do this, open
PWMExample.cydwr
from the
Workspace Explorer.
Figure 5-16. Opening “.cydwr” File
13.Select the
LED_GREEN
pin to P1[6] in the CY8CKIT-049 kit.
Figure 5-17. 'cydwr' Pin Settings
14.Select
Build
>
Build PWMExample
.
Figure 5-18. Building the Project
15.Connect the CY8CKIT-049-4xxx kit to the PC while pressing the SW1 button; this will put the
device into Bootloader mode. Entry into Bootloader mode is shown by the blinking LED.
Содержание verical CYPRESS CY8CKIT-049-42 Series
Страница 66: ...CY8CKIT 049 4xxx PSoC 4 Prototyping Kit Guide Doc 001 90711 Rev J 65 Appendix ...
Страница 67: ...CY8CKIT 049 4xxx PSoC 4 Prototyping Kit Guide Doc 001 90711 Rev J 66 Appendix ...
Страница 68: ...CY8CKIT 049 4xxx PSoC 4 Prototyping Kit Guide Doc 001 90711 Rev J 67 Appendix ...
Страница 69: ...CY8CKIT 049 4xxx PSoC 4 Prototyping Kit Guide Doc 001 90711 Rev J 68 Appendix ...
