Assembly Instructions
Norma Jean Sewing Machine Cabinet
Page 19
Your platform located in the cabinet can be drilled to accommodate the mounting of a sewing
machine to it. It is NOT our recommendation to mount or bolt your sewing machine down for the
Air-Lift mechanism to work. The Air-Lift mechanism will still work even if the sewing machine is not
bolted down.
If however, you want to mount/bolt your sewing machine down to the platform, you MUST wait
until you receive your machine specific insert. Once you receive your machine specific insert, move
your machine on the platform to allow the insert to fit around the machine.
Once the insert fits around the machine, you can mount/bolt the machine down. You will need
to purchase mounting bolts for your sewing machine from your local dealer or the manufacture
of your machine. Place the bolts in the bottom of your sewing machine and mark the bottom of
the bolt with lipstick or a marker. Place the machine with the bolts hanging down and the insert in
place on the platform in the preferred position.
CAUTION:
This cabinet is equipped with a vertical Air-Lift Mechanism which is powered by gas filled
cylinder to aid in raising and lowering the sewing machine.
Because gas fllled cylinder is heavy duty do not let go of machine and platform when moving
from one position to the other.
To move the Platform to any position please follow the instructions on following page.
Freearm Position
Flatbed Position
Storage Position
