Assembly Instructions
Norma Jean Sewing Machine Cabinet
Page 6
Step 5.
Attach the plastic Trays (x4) to the Door
(O) by inserting the #8x1/2” Panhead Screws
(x16) into the Door (0). The (3) smaller trays are
mounted in the three top rows of predrllled holes,
Step 6.
Attach Support Hinges (x4) to Right and
Left Supports (L & K) with #7x518” Flathead
Screws (x8); Insert Round Magnets (x2) into holes
in Leaf Supports (L & K) (as shown In FIG. 6).
FIG. 5
FIG. 5A
FIG. 6
#4x1/2”
Bronze Flathead Screw
x1
with larger tray mounted in bottom row. Attach
Magnet Strike Plate wtth #5x5/8” Flathead Screw
(x1).
Attach (3) Door hinges to Door (O) with #4x1/2”
Flathead Screws (x12) (as shown In FIGS. 5 and 5A).
#8x1/2”
Panhead Screws
x16
#4x1/2”
Gold Flathead Screws
x12
Strike Plate
x1
Door Hinge
x3
Note: Long Side to Door
Cover the magnet with a wood block and tap hard
to get magnet in the hole. Attach rubber tabs to
Leaf Supports (L & K), make sure and place tab on
opposite edge from round magnet!
Plastic Tray Large
x1
Plastic Tray Small
x3
Support Hinge
x4
Round Magnet
x2
Wood block
Seff Sticking
Rubber Tab
x2
#7x5/8”
Flathead Screw
x8
O
K
L
