10
10AQ
B)
Install Roof Beams with Bolts and Nuts.
C)
Install Side Wall Channel with Large Screws.
D)
Install Side Wall Angles. Wall Angles should overlap by 8 1/4” (21,0 cm). Use Bolts and
Nuts where Wall Angles overlap. Use Large Screws where Wall Angles meet Trusses.
E)
Repeat for additional Modules.
Each Module is installed identically to the existing Truss Sections:
8 1/4”
21,0 cm
B
D
E
C
Overlap Wall Angles by 8 1/4”
(21,0 cm)
B
C
D
Step 5 - Continued.
10650
10650
10650
10650
10887
10625
10625
Overlap Length
11
11J
Step 6 - Reinstall the Rear Wall.
Once all Truss Sections have been erected, you may reinstall the Rear Wall as follows:
A)
Fasten the Rear Wall to the Floor Frame with Large Screws.
B)
Fasten the rear Wall Channels from the last Truss with Large Screws.
C)
Fasten the Side Wall Angle to the Rear Wall with Large Screws. If holes do not align, it may be
helpful to fasten the Side Wall Angle to the Rear Wall fi rst, and then to the rest of the building.
D)
Fasten the rear Roof Beams to the main building with Bolts and Nuts.
A
B
C
D
A
B
C
D
