Step 7
E20
●
Parts Needed For
●
Wall Assembly
●
●
●
●
●
9027 Main Wall Panel (4)
●
●
●
●
●
9025 Rear Wall Panel (2)
20
3
Install rear wall panels to angle, channel and frame
using bolts and screws. Fasten overlaps with bolts,
except outer ribs, use a 7/8" bolt, spacer and nut. Use
7/8" screw and spacer at bottom of rib into frame.
4
Fasten rear wall angle at the outer ribs using 7/8"
screws and spacers.
The wall panels come in two lengths. Each wall panel
has a crimped rib on one side. The crimped rib should
go under the rib of the panel that follows it.
1
Locate all of the main wall panels and set each one
alongside the building. Fasten the wall panels at the
top with bolts and nuts and the bottom with screws.
2
Fasten panel rib where it overlaps the adjacent
panel using a bolt and nut, with screws where shown.
9027
9025
9025
STEP
3
9027
Detail Showing
Panel Bolted
to Wall Channel
Bolt and nut
does not go
thru wall channel
at overlap
STEP
1
STEP
2
STEP
4
7/8" screw
Panels rest on
frame as shown
7/8" bolt
spacer
spacer
spacer
7/8" screw
7/8" bolt
TOP & BOTTOM
MIDDLE
hex nut
