1
Attach the angle braces to the
right and left outer gables using
screws. Attach a track support to
one left and one right gable using a
bolt and nut. See the figure.
2
Fasten the two gables, with track
supports, to the front of building, bot-
tom leg behind wall panel, using
screws, bolts, nuts and acorn nuts as
shown. Angle brace fits behind door
jamb.
3
Fasten remaining gables to rear of
building. Gable legs fit between rear
wall channel and wall panels. Re-
move and reinsert the bolts and nuts
in corners.
4
Install rear wall panels to channel
and frame (centered on rear wall)
using bolts and screws. Fasten over-
lap with bolts and nuts, and screws at
top and bottom.
5
Fasten rear wall angle across the
inside top of rear panels using screws.
19
The gables go on top of the front and
rear walls to support the roof.
NOTE
The gables are packed nested
together and might be mistaken
as one piece. Carefully separate
them before continuing.
Step 6
E19
●
Parts Needed For
●
Outer Gable Assembly
●
●
●
●
●
9042 Angle Brace (4)
●
●
●
●
●
9028 Right Outer Gable (2)
●
●
●
●
●
9029 Left Outer Gable (2)
●
●
●
●
●
9026 Rear Wall Panel (2)
●
●
●
●
●
9043 Rear Wall Angle (1)
9043
9028
9026
9028
Install Brace to
Inside of Gable
STEP
1
STEP
2
STEP
4
STEP
5
Fasten
2nd Hole
STEP
3
9042
9029
9042
9042
9026
acorn nuts
9029
Track Support 6228
Crimped Rib
Underneath
acorn nuts
9042
