Arrow 697.68617, Руководство пользователя и инструкции по сборке

Страница: 21 / 32

The studs provide a surface for at-
taching the siding panels.
1
Following dimensions, measuring
from the ends of angles, place a stud
between each corner and splice post
at the rear of building and 2 studs
between corner posts at the sides.
Position stud inside top angle and
fasten with a screw at the lower hole.
2
Rest bottom tab (large hole) out-
side floor frame. Do not fasten tab at
this time. Repeat procedure for the
remaining studs around the building.
3
Place front wall channel into
position behind corner post and door
jamb. Fasten using three screws.
● ●
● ●
●
9344 Siding Stud (6)
● ●
● ●
●
9365 Front Wall Channel (2)
●
Parts Needed For
●
Studs/Front Channel
Step 8
X21
21
9344
LARGE HOLE
DO NOT FASTEN TAB
AT THIS TIME
22 1/16"
56 cm
9365
29 3/16"
74 cm
9365
FASTEN STUD AT
LOWER HOLE