Arrow 697. 68206-A, Руководство пользователя и инструкции по сборке

Страница: 14 / 32

The front floor frame is made up of
three pieces. The rear floor frame is
made up of two pieces. The holes in
these pieces will align when the
pieces are positioned with correct
amount of overlap. The illustrations
below show the proper overall length
for the front and rear. Proceed as
follows:
1
Place the front floor frames as
shown. Center the ramp, with drain
holes facing outside, on top of the two
front floor frames. Join the frames by
inserting eight screws.
2
Overlap the rear floor frames as
shown. The holes in these pieces
will align when the pieces are posi-
tioned with correct amount of over-
lap. See the illustrations below for
the proper overall length of the rear
floor frame. Join the frames by insert-
ing five bolts into frame set as shown.
3
Double check the length of each
and set these pieces aside for later
use.
14
Step 1
Q14
●
Parts Needed For
●
Floor Frame Assemblies
● ● ● ● ● 8934 Ramp (1)
● ● ● ● ● 9367 Front Floor Frame (2)
● ● ● ● ● 8936 Rear Floor Frame (2)
9367
STEP
1
8934
Front Floor
Frame Assembly
119 3/8" 303,2 cm
STEP
2
9367
8936
Rear Floor Frame
119 3/8" 303,2 cm
8936
119 3/8" 303,2 cm Front
119 3/8" 303,2 cm Rear
STEP
3
8936
9367
8934
9367
DRAIN HOLES FACE
OUTSIDE