Instruction Manual of PR5534-01 Model Controller
2010-12-01 N0
：
VER1.1
-
９
-
steaming device, pour the diluted liquid into the steaming device and assemble the
connection pipes. After 60 minutes, start the machine and heat 30 minutes, then stop
the device and drain out the water of the tank.
12. The connection wire of power box should wire according to the specification, the output
wires should connect correctly to avoid short-circuit.
13. After using, please cut off the power to avoid aging of the device.
14. The installation of the controller should be carried out by qualified personal according
to the installation manual.
15. Do not try to repair of the modifier parts of the controller, and the high-voltage might
cause danger. All the maintenance and repairing should be carried our by qualified
personal.
For any consequences caused by wrong operation, the user should bear the
responsibility.
VI. Declaration
1)
Any maintenance or repairing should be handled by qualified maintenance personal
authorized by the manufacturer or agent of this controller. Otherwise, the products
cannot enjoy free maintenance and any results will be bore by the customer.
2)
This manual is just for reference. If there are any changes or modifications on the
design or explanation, please excuse for no further notice. If there are any mistakes or
unclear points, the explaining right belongs to the manufacturer.
20100803
“PR5534_01 V10” by xdm
20101201
“PR5534_01 V11” by xdm
