Parts Needed For
Wall Panels
Step 8
6515 Wall Panel (2)
Each wall panel has a crimped rib
on one side. The crimped rib should
go under the rib of the panel that
follows it.
1
Locate all of the wall panels and
set each one alongside the building.
2
Be sure that you have the
correct panels in each position.
Do this by overlapping the panels
and determining if the holes line
up with the holes in the frame.
Panels rest on
frame as shown
2
STEP
1
6515
STEP
Crimped Rib
Underneath
ABY21
(30)
(3)
3
Fasten the wall panels at the top
and bottom with screws.
4
Fasten the center of each panel
to the wall channel with screws.
Fasten overlapping ribs as before.
3
STEP
Bolt and nut
does not go thru
wall channel
at overlap
4
STEP
Detail Showing
Center of Panel
Screwed to Wall
Channel
21
