1
Position a corner panel at the
corner of the fl oor frame as shown.
The widest part of each corner panel
must be placed along the side of the
building for all four corners. Fasten the
corner panel to the fl oor frame with
three screws. Fasten overlapping rib
using two screws and a bolt with nut.
Support the corner panel with a step
ladder until a wall panel is attached.
2
Attach the front wall panels to
the front corner panels, as shown.
A small gap will exist between front
wall panel and ramp.
3
Attach the wall panels to the rear
corner panels, as shown.
NOTE
Be careful to install the correct
panel in each position as shown
6515 Wall Panel (2)
9373 Front Wall Panel (2)
6020 Corner Panel (4)
Step 6
ABY19
Parts Needed For
Corners
NOTE
The remainder of the building assembly requires many
hours and more than one person. Do not continue
beyond this point if you do not have enough time to
complete the assembly today. A partially assembled
building can be severely damaged by light winds.
Each screw and bolt in the wall
requires a washer.
4
Double-check the part numbers of
the wall panels, before proceeding.
The fl oor frame must be square
and level or holes will not align.
STEP
1
9373
9373
FRONT
Panels rest on
frame as shown
Narrow
Side
6020
STEP
3
STEP
2
STEP
4
CORRECT
INCORRECT
(38)
(6)
6515
6020
6020
REAR
6020
SIDE
TOP VIEW
Wide Side
Washer
SIDE
6515
9373
6020
6020
9373
6515
6020
6020
6515
19
