Arrow Storage Products DKGA-A, Руководство пользователя и инструкция по сборке

Страница: 12 / 32

12
You will need for this page:
Step 3:
New Rear Wall Install
2
Position the Door Jambs as
shown and secure to the Front
Wall Panel using Small Screws .
Double check that the holes in the Door
Jamb line up with the holes in the Wall
Post (Hinge) . If they do not, the Left
and Right Door Jambs are most likely
switched.
Carefully position the New
Rear Wall Assembly as shown
and secure with four (4) Large
Screws on both sides to Floor Frame
and Side Angle . Reuse Side Wall
Channels from original unit and attach
using four (4) Large Screws as shown.
1
12AG
IMPORTANT: When installing
the Front Wall Assembly in
the building, two (2) people
should position and hold the
Assembly in place until it is
secure. Failure to do so could
result in bending the Front
Frame and Fascia pieces.
(QTY: 6) (QTY: 2)
(QTY: 6)
Assemblies from Step 2:
• New Rear Wall Assembly
Right Door
Jamb
10622
1
10622
80037
LS LS
SS
SS
SS
SS
LS
LS
LS
LS
LS
LS
LS
LS
LS
Reused Parts:
• Side Wall Channel (2)
Side Wall Channel will attach
behind Wall and Corner Panels.
Left Door
Jamb
80037
1