Arrow Storage Products 697.68220, Руководство пользователя и инструкции по сборке

Страница: 19 / 32

NOTE
Be careful to install the correct
panel in each position as shown
6515 Wall Panel (2)
9373 Front Wall Panel (2)
6514 Corner Panel (4)
Step 6
S19 ctr
Parts Needed For
Corners
NOTE
The remainder of the building assembly
requires many hours and more than one
person. Do not continue beyond this
point if you do not have enough time to
complete the assembly today. A partially
assembled building can be severely
damaged by light winds.
Each screw and bolt in the wall
requires a washer.
4
Double-check the part numbers of
the wall panels, before proceeding.
The fl oor frame must be square
and level or holes will not align.
STEP
1
6515
9373 9373
6514
6514
REAR
FRONT
9373
Panels rest on
frame as shown
6514
SIDE TOP VIEW
Narrow
Side
6514
6515
Wide Side
STEP
3
STEP
2
STEP
4
6515
9373
6514
6515
Washer
Crimped Rib
Underneath
SIDE
#8Ax5/16" (8 mm) Screw
#8-32 Hex Nut
#8-32x3/8" Bolt (10 mm)
CORRECT INCORRECT
1
Position a corner panel at the
corner of the fl oor frame as shown.
The widest part of each corner panel
must be placed along the side of the
building for all four corners. Fasten
the corner panel to the fl oor frame
with four screws.
Support the corner panel with a step
ladder until a wall panel is attached.
2
Attach the front wall panels to
the front corner panels, as shown.
A small gap will exist between front
wall panel and ramp.
3
Attach the wall panels to the rear
corner panels, as shown.
(38)
(4)
19