© 2013 ARRMA Durango Ltd. A subsidiary of Hobbico, Inc.
DESIGNED FAST. DESIGNED TOUGH.
26
Servo Removal
4mm
5
6
Disconnect servo arm ball-joint and remove steering
assembly from servo box.
Inspect servo saver, ensuring that it is set to the
factory setting above. Set with 7mm hex driver.
Reassembly is the reverse the removal process.
Steering Access (cont.)
Tools Required
2mm Hex Driver
Upgrading your servo will give quicker
and more powerful steering.
ARRMA-RC.COM/
SUPPORT/
1
2
Access the receiver (page 25); unplug the steering servo
wire (CH1) and remove the wire from the receiver box.
Remove the two servo box cover bolts with a
2mm hex key and remove the cover.
Steering
(CH1)
Throttle
(CH2)
3
Disconnect the steering ball joint and lift the servo
assembly from the chassis.
4
Note mount spacing and servo arm position.
Remove mount and arm bolts with a 2mm hex key.
Содержание ADX-10
Страница 1: ...380037 ...
Страница 40: ......